A question we hear at our Johannesburg CBD counter again and again: a factory owner or a tailor buys an overlocker, then asks, "And who prints the jerseys before we sew them?" or "Where do we get the school badges pressed on?" Until now we could only point them elsewhere.
Now we can plan that side of the room as well. Asia Sewing Machines works with AM.CO.ZA, the South African machinery company with branches in Johannesburg, Cape Town and Durban, which supplies sublimation printers, DTF systems, heat presses and cutting equipment to print and garment businesses around the country. When we plan a workroom with a customer, the printing, pressing and finishing corner can now sit in the same plan as the sewing lines we already install and service.
Why we work with AM.CO.ZA
Service close by. AM.CO.ZA runs its own showrooms in Johannesburg, Cape Town and a newly opened showroom in Durban, and technical questions go to machinery.support. When a factory is waiting on a batch of jerseys, a printer cannot sit idle, so this mattered more to us than anything else.
Straight quoting. We can put a decoration corner into a workroom quote without it pushing the sewing machines out of the budget. For a small factory, that is often the difference between doing it now and doing it next year.
Prints that hold up in a busy room. Our team ran test transfers and pressed them onto fabric from our own shelves before we put the equipment in front of customers. You can read what other businesses say about AM.CO.ZA on its customer reviews page.

Sublimation for sportswear and teamwear
For clothing factories making soccer kits, netball dresses and cycling tops, we recommend AM.CO.ZA's FastCOLOUR ONE 1800mm sublimation printer. It prints full jersey panels onto 1600mm sublimation paper rolls, which are then transferred onto polyester fabric before cutting and sewing. AM.CO.ZA has a video of this printer running colour bars and full artwork if you want to see it work.
The printed panels then come straight to the sewing line. Overlockers and coverstitch machines handle stretch polyester well, and our workshop sets each machine's tension and differential feed for the fabric during machine installation.

DTF transfers for school wear, names and numbers
Most school sewing rooms and small uniform suppliers don't need a roll printer. They need crests, names and numbers on tracksuits and golf shirts, often at short notice. For them, AM.CO.ZA's 300mm DTF printing and powdering set is the practical choice. It runs on DTF white ink, white DTF powder and 300mm DTF film rolls, all from the same supplier, so customers aren't chasing consumables across Gauteng. AM.CO.ZA's training print session on this set shows how a new operator gets going.
For pressing, we pair it with a Heatware 380×380mm clamshell press for chest prints, or the Heatware MT5 multi-press where a workroom also does caps and mugs, plus a cap press for embroidery shops that want printed caps next to stitched ones. Small things matter too: heat-resistant tape to hold transfers in place and a PTFE cover sheet to protect garments on the platen.

Cutting for bigger production rooms
Factories that cut their own pattern templates and board packaging can look at AM.CO.ZA's FlatCUT oscillating-blade cutter (see it cutting), and for appliqué shapes, felt badges and fabric labels, its TruCUT 1300×900mm laser. These aren't for every customer, so we only bring them up when the volumes make sense. More of the range is in AM.CO.ZA's online machine guide.
Training, not just boxes
We've always said a machine that isn't set up properly wastes time and fabric. The same goes for printers and presses. Our own operator training covers the sewing side, and AM.CO.ZA hands over its printers and presses with training on the decoration side. Operators who want to go further can join a hands-on Machine Class at Ambitious Academy, AM.CO.ZA's training partner, or study at their own pace with its online courses, including a DTF course and a sublimation course.

What it means for our customers
- Clothing factories: print, press and sew under one roof, with one plan for layout, power and service.
- Embroidery shops: add full-colour DTF prints and printed caps next to embroidery, for jobs where stitching isn't the best fit.
- Tailors and alteration shops: press on names, badges and small logos without sending work out.
- Schools and training centres: a complete classroom setup, from sewing machines to heat press, with training on both sides.
Our own team still handles what we do best: sewing machine sales, installation, servicing and repairs. AM.CO.ZA supplies and supports the printing, pressing and cutting equipment, and we plan the room together so the customer gets one layout.
Planning a new workroom, or adding decoration to the one you have? Contact our CBD team and ask for a quote, and we'll plan the sewing and decoration sides together with AM.CO.ZA. You can also visit AM.CO.ZA to see the full range.







